Dynaudio Emit 30 Floorstanding Speakers

Description

Emit 30 is perfect for larger stereo systems or compact multi-channel home cinema set-ups in medium to large rooms. If you’re looking for a little more power from your system, you’ve found it. Emit 30 is a compact two-and-a-half-way speaker designed to impress whether it’s used as a stand-alone stereo pair or as part of a 5.1-channel(or more) home cinema.

Like its little brother, the Emit 10, it uses 14cm MSP woofers, similar to those used in the Evoke series – this time doubled up in each speaker for more low-frequency muscle, plus midrange clarity and punch.MSP stands for Magnesium Silicate Polymer. It’s a material we developed in-house for our woofer cones, and have used for decades –including on our most-lauded high-end models. MSP provides precisely the right combination of lightness, stiffness and damping (one we’ve tuned and honed over the years) to deliver control and outright power exactly where it’s needed.

Premium woofer technology

The cones are moulded in one piece; we don’t use a separate glued dust-cap. The small balance ribs around the edge of the centre are bonded directly to the voice coil behind them, making the whole motor assembly one solid piece. Using fewer moving parts gives our engineers fine control over how the speaker moves, which, in turn, means fine control over how it performs. You’ll hear it as strong, tight bass and startlingly clear vocals, guitars and more. Even at eyebrow-raising volume.

Each woofer is powered by a dual-stacked strontium carbonite Ferrite+ ceramic magnet system. Using two magnets means we can more effectively direct where the magnetic energy goes. It’s a lesson we learned while developing the award-winning Special Forty anniversary series, and it’s thrilling to be able to use it in our entry-level family.

The target for all that flux is the voice-coil. We use aluminium windings in Emit 30. Aluminium is light (which minimises inertia on the cone’s back-and-forth movement), and because it’s lighter than copper wire, it means we can pack more windings onto the two-layer glass-fibre former. More windings equals more power and greater control over fine movement. There’s a twist, though (please pardon the pun): we’ve coated the aluminium wire in a very thin copper coating to further increase the control the amplifier hason the voice-coil. More force with only a fractional weight gain.

High-performance Cerotar tweeter

While the twin 14cm mid/bass units deal with the midrange and bass, the upper frequencies are handled by the tweeter. Emit might be an ‘entry-level’ speaker, but we certainly haven’t used any old unit off the shelf; witness the incredible Cerotar tweeter(the same as we use in Evoke). It’s based on the Esotar Forty anniversary tweeter and the Esotar Pro found in our Core studio reference speakers, and must be heard to be believed.

The 28mm coated soft-dome diaphragm is backed up by the clever Hexis innerdome. The playing surface has been specifically engineered to produce ultra-clear, ultra-detailed high-frequencies without breakup (even at high volumes), while the Hexis smooths the airflow behind it to reduces unwanted resonances. An aluminium voice-coil and airflow magnet system provide the power. Cerotar is designed for high performance without listener fatigue –perfect if you’re given to long listening sessions (and you’re music lovers, so we bet you are).

The bass port on the back panel has dual flares (one inside; one outside), and has been tuned to minimise unwanted ‘chuffing’. It’s supplied with foam inserts that can be used to optimise performance for the speaker’s position relative to the wall.

Discover just how good your collection can sound

Emit is your way into true high-end Danish hi-fi. Enjoy your music and films in a way you never thought possible at the price, thanks to trickle-down technology from Dynaudio’s incredible Confidence, Contour i and Evoke ranges.

Whatever your tastes, you’ll hear the result of 45 years of painstaking research, development and listening experience. From the proprietary MSP cone material and fabric soft-dome tweeter technology Dynaudio has been using since 1977, to the up-to-the-minute Hexis inner dome and magnet systems, Emit lets you join the ‘high-end club’ in style.

Use them in stereo. Use them in a home-cinema system. Stream through them. Play your old vinyl records. Take your next step into authentic audiophile performance.

Features

• Full-bodied authentic sound with an elegant minimalistic design
• 2.5-way configuration featuring 2 14 W MSP drivers and a Cerotar tweeter
• Hybrid crossovers – 1st-order crossover for the tweeter and a 2nd-order topology for the woofer
• Dual-flared rear mounted bass port
• Perfect for room sizes between 10-20 sqm
• Advanced sound tuning using ”Jupiter”
• Spike and rubber feet for a solid foothold

Specifications