Welcome to Dusonav. Fantastic Beautifully designed
Category: Speaker

ELAC Uni-Fi 2.0 UF52 Floorstanding Speaker (Pair)

    • The ELAC Uni-Fi 2.0 UF52 is a 3-way bass-reflex floor-standing speaker that delivers strong performance and value. It features a concentric driver combining a 1″ soft-dome tweeter and a 4″ aluminum-cone mid-range, plus three 5.25″ aluminum-cone woofers. elac.com+2Crutchfield+2 Its nominal impedance is 6 Ω and sensitivity around 85 dB, which means a quality amplifier is recommended to drive it well. Crutchfield Frequency response is specified at approximately 42 Hz to 35 kHz, giving useful bass extension and very wide high-frequency reach. elac com+1 The cabinet is solidly built with thick MDF and internal bracing to reduce resonance, and it’s finished in black ash vinyl.

Description

The Next Level | ELAC Uni-Fi 2.0 Floorstanding Speaker – UF52

For larger environments or when you’re looking for greater bass dynamics, the UF52, with its multiple bass driver configuration, will meet the needs of even the most demanding soundtracks or music. Using the same outstanding drivers and technology as the other models in the series ensures this compact, 3-way, bass-reflex floorstander delivers a matched sonic signature.

Warranty:

2-year manufacturer’s warranty

Features:

  • 3x 5.25″ Aluminum Cone Woofers
  • 4″ Aluminum Cone Midrange
  • 1″ Concentric Soft-Dome Tweeter
  • 140W Peak Power Handling
  • Bass-Reflex via Three Rear-Firing Ports
  • 5-Way Binding Posts
  • Designed by Andrew Jones

3-Way Speaker Design
With separate tweeter, mid-range, and bass drivers, the Uni-Fi UB52 delivers clean bass without distorting vocals.

Newly Developed Concentric Driver
A new wide-surround tweeter enhances its low and high frequency extension, allowing for improved blending with the midrange driver. An entirely new mid-range design features a larger diameter voice coil, new aluminum cone profile, new low-profile surround, and an all-new neodymium magnet assembly.

New Single Piece Woofer
A newly developed single-piece aluminum dished cone results in improved stiffness. Combined with an oversized magnet, large diameter voice coil, and extended pole piece, these changes result in improved accuracy and bass dynamics.

Sophisticated 3-Way Crossover
An enhanced design improves response linearity, improves driver integration, and delivers a true 6-ohm nominal impedance for compatibility with virtually all AV receivers.

Enhanced Bracing
Every Uni-Fi 2.0 enclosure is engineered with thick MDF outer walls and a luxurious black ash vinyl finish. Specially located internal bracing adds stiffness and strength to the cabinet’s outer walls, reducing the cabinet vibration that causes unwanted coloration.

Technical Specifications:

Speaker Configuration 3-Way
Power Handling 140 W Peak
Recommended Amplifier Power 40 to 140 W
Drivers 3 x 5.25″ / 133.35 mm Aluminum Cone Woofer
1 x 4″ / 101.6 mm Aluminum Cone Midrange
1 x 1″ / 25.4 mm Concentric Soft-Dome Tweeter
Enclosure Type Bass-Reflex
Ports 3 x Rear-Firing
Frequency Response 42 Hz to 35 kHz
Impedance 6 Ohms
Magnetic Shielding None
Wired I/O 1 x 5-Way Binding Post Pair Input
Crossover Low-Pass:
200 Hz
High-Pass:
2 kHz
Sensitivity 85 dB
Physical
Placement & Mounting Options Floorstanding
Cabinet Material MDF
Grille Cloth (Removable)
Dimensions 7.3 x 38.6 x 10.8″ / 18.5 x 98 x 27.4 cm
Weight 43.3 lb / 19.6 kg

Customer Reviews

No reviews yet.

Contact Us
First