Description
VPI Cliffwood Turntable & AT-VM95E Cartridge (Black)
All of VPI’s products are made in Cliffwood, New Jersey. Most companies source their components outside their country when making entry-level products. This is why VPI celebrates its heritage and workers by naming this turntable after their home!
Features of the VPI Cliffwood Turntable & AT-VM95E Cartridge
- Gimbal Tonearm
- AT-VM95E Cartridge
- Machined Aluminum Platter
- Ready to play out of the box
- Made in the USA
Cliffwood Turntable Specifications
| Chassis Composition | Vinyl Wrapped MDF |
|---|---|
| Platter Type & Size | 11.5″ Aluminum, 7 lbs |
| Tonearm Included | Player Tonearm |
| Motor RPM | 600 RPM |
| Motor Pulley Accuracy | +/- .0005″ |
| Wow and Flutter | .1% |
| Average RMS Distortion | .36% |
| Footprint | 16″ x 11″ |
| Overall Size | 19″ x 14″ x 6″ |
| Total Weight | 12.9lbs |
AT-VM95E Cartridge Specifications
| Frequency Response | 20-22,000 Hz |
|---|---|
| Channel Separation | 20 (dB at 1 kHz) |
| Vertical Tracking Angle | 23° |
| Vertical Tracking Force | 1.8-2.2 g (2.0 g standard) |
| Stylus Construction | Bonded round shank |
| Recommended Load Impedance | 47,000 ohms |
| Coil Impedance | 3.3 k ohms (1 kHz) |
| DC Resistance | 485 ohms |
| Coil Inductance | 550 mH (1 kHz) |
| Load Capacitance | 100 to 200 pF |
| Output | 4.0 mV (1 kHz, 5 cm/sec.) |
| Channel Balance | 2.0 dB (1 kHz) |
| Stylus Shape | 0.3 x 0.7 mil elliptical |
| Cantilever | Aluminum pipe |
| Mount | Half-inch |
| Weight | 6.1 g (0.22 oz) |
| Dimensions | 17.2 mm (0.68″) H × 18.9 mm (0.74″) W × 28.3 mm (1.20″) D |
| Replacement Stylus | AT-VMN95E |
