Taga Harmony Platinum SW-10 v.3 Active Subwoofer

Born in Europe – Crafted for the World

We have always considered Platinum as one of the most important series in the premium category.
That is why high expectations were placed on our development team during the crafting of the newest Platinum v.3 subwoofers.
We were committed to creating an extraordinary subwoofer in terms of sound performance while maintaining the highly acclaimed shapes and looks of the current model.
We have to admit without any doubt that the final result is amazing and even exceeds our expectations.

We implemented our newest concept, “Born in Europe – Crafted for the World,” in this new project, resulting in deep, very well-controlled, and defined bass.

We do believe that such high performance has never been available at this price level and far beyond.

The Platinum SW-10 v.3 is a 10” single driver subwoofer with a built-in high-current amplifier and utilizes a slotted bass port on the rear.

The v.3 version utilizes a totally new amplifier and power boards with higher-grade components (capacitors, etc.), a heavily modified woofer, and redesigned internal cabinet structure (bigger internal volume and increased stiffness).

The new built-in amplifier delivers 240 watts of power, is characterized by much better efficiency and greater current drive, which results in lower distortion, smoother and flatter response, and much faster amp operation with significantly reduced operation noises. An integrated clipping limiter maintains the best performance and safe operation of the amp and woofer, even at extremely high volume levels.

The redesigned bass driver can operate in higher amplitude ranges and can react faster to any changes in the audio signal structure.

A removable IEC-type power cord gives an option to upgrade your system with a premium audiophile power cable at any time.

The Platinum SW-10 v.3 subwoofers deliver the most powerful, deep bass with staggering definition, location, and dynamics never met at this price level before. It is the absolute best buy in premium subwoofers!

Warranty:

1-year manufacturer’s warranty.

Taga Harmony Platinum SW-10 Features:

• A 10” single driver subwoofer with a built-in high-current amplifier.
• The v.3 version utilizes a totally new amplifier and power boards with higher-grade components.
• The built-in amplifier delivers 240 watts of power.
• The redesigned bass driver can operate in higher amplitude ranges.
• Comes with a removable IEC-type power cord.

CABINET
A subwoofer cabinet design and built quality are some of the most critical elements influencing sound performance.

We have developed TLIE (Taga Low Interference Enclosures) cabinets to increase stiffness and limit any unwanted resonances of the enclosure.
The TLIE cabinets are built with high-density and quality MDF boards and stand on solid feet, which provide good isolation from the floor.
The rounded edges not only look modern and eye-catching but also play a significant role in lowering unwanted vibrations, diffraction, turbulence, and standing waves, which can negatively affect the subwoofer’s sound performance.

The internal configuration (acoustical labyrinth) of a cabinet supports bass-reflex port efficiency and speed.

Acoustic-damping material used inside enclosures eliminates the problem of internal standing waves.
Carefully selected high-quality vinyl finishes are very durable, elegant, imitate the natural wood texture, and are very pleasant to touch. The vinyl finishes are neatly applied to cabinets using precise machinery to provide the best look.

BASS DRIVER

1.    Ferrite bucking magnet
2.    T-yoke
3/4. Two oversized ferrite magnets
5.    Top plate
6.    Terminal
7.    TSAC Ferrum injection-molded chassis with anti-oxidation surface process
8.    Round wire copper voice coil
9.    Spider
10.  Polypropylene cone and rubber surround
11.  Polypropylene dust cap
12.  EVA gasket
THAW – Taga High Amplitude Woofer offers extended cone excursion, which results in increased speed and range. Bass is fast, strong, low, and dynamic.
TSAC – Taga Super Air Cooling used in the woofer helps quicker and more effective dispersion of internal heat to support high power and volumes.

BASS-REFLEX
Low-turbulence and high-velocity rear slotted ports provide exceptional dispersion of low frequencies and are located very close to the floor.

AMPLIFIER
THCA – Taga High Current Amplifier offers huge amounts of raw power, and an oversized, high-performance heatsink quickly dissipates generated heat, increasing the efficiency and range of the amplifier.
High Current Amplifier utilizes a very well-designed board layout and high-quality components to provide reliability and the highest possible bass quality.

An integrated clipping limiter maintains the best performance and safe operation of the amp and woofer, even at extremely high volume levels.

A high-quality toroidal power transformer provides stable energy that is available at all power levels.

Taga Harmony Platinum SW-10 Technical Specifications: