Description
Revel in-ceiling loudspeakers draw upon the same research, resources, and unique perspectives that put all our loudspeakers in a class by themselves.
Warranty:
1-year manufacturer’s warranty
Features:
-
Long-throw woofers with cast frames and rubber surrounds provide high output with low distortion
-
1-inch (25mm) angle-adjustable, metal-dome tweeter with an integrated waveguide provides optimized response both on and off-axis
-
High-order crossover network with premium-quality components delivers extraordinarily accurate timbre reproduction
-
The boundary compensation switch (C783/C763) lets you adjust the speaker to maintain tonal accuracy when the speaker is placed near a wall
-
Three-position tweeter level control (C783/C763/C583/C563) lets you adjust for optimum response in a variety of acoustical environments, or for using the speakers without grilles
Benefits:
Stereo sound from a single in-ceiling speaker
Here’s a cleverly designed solution from the audio pros at Revel. The C563DT in-ceiling speaker lets you enjoy stereo music from a single overhead speaker. Use it in areas where a pair of in-ceiling speakers may be impractical, such as hallways, entryways, small offices, or walk-in closets.
The Revel C563DT’s dual-tweeter design reproduces both the left and right channels of your stereo music sources with a single speaker.
Clear, adjustable sound
The crisp bass response comes courtesy of a 6-1/2″ woofer, and smooth highs are dished out from twin 1″ aluminum dome tweeters. This speaker also has a three-position output level switch for the tweeters, which lets you tailor the sound to the acoustics of your room.
Trickle-down technology
The C563DT benefits from the research and design work that went into Revel’s higher-end in-ceiling speakers. For instance, each tweeter has an integrated waveguide, which helps provide great sound across a wide listening area. And this speaker’s high-order crossover network allows the woofer and tweeters to blend together seamlessly.
The C563DT also features two pairs of high-quality push-post input terminals for a solid connection with your speaker wire. A lifetime warranty ensures excellent long-term performance.
Also great for big rooms
The C563DT is an excellent choice for overhead music in large rooms. Install one in each corner of your spacious living room or bedroom and get stereo sound no matter where you’re standing. Its dual-tweeter design gives you the full song without worrying about being too close to one speaker, and too far from another. That way, you aren’t hearing the guitar and vocals from the left speaker, and bass and drums from the right.
DIY installation
If this is a do-it-yourself install, check out my guide to installing in-ceiling speakers, along with our selection of in-wall speaker wire. You can paint the included magnetic grille to have your speaker blend in with your décor.
Technical Specifications:
| Height |
|
| Width | Square grille finished, Weight 9.1″ (23.1 cm |
| Depth | Mounting depth 4.9” (12.5 cm) |
| Features |
|
| Weight | 1.8Kg |
| High-Frequency Driver Components | Two 1″ aluminum dome tweeters with waveguides |
| Low-Frequency Extension | High-Frequency Extension 3-position HF level control |
| Low-Frequency Driver Components |
|
| Mounting |
|
| Recommended Amplifier Power | 10 – 130 Watts RMS (per channel) |
