Crown DCI2600 - 2 channel, 600 Watts Analog Power Amplifier

Key Features

2-channel professional installation power amplifier
600 watts per channel output for reliable high-power performance
Supports low-impedance (4Ω / 8Ω) and high-impedance (70V / 100V) speaker systems
Channel-independent Hi-Z and Low-Z output selection
Bridgeable channels for higher power requirements
High damping factor for tight and accurate bass control
Wide frequency response for clear and natural sound reproduction
Low distortion for clean audio output even at high power levels
Advanced protection circuits against overheating, short circuits, overload, and DC faults
Efficient cooling system with variable-speed fan for stable operation
Auto standby mode to reduce power consumption when idle
Universal power supply with power factor correction for stable performance
Remote power on/off capability for system integration
Standard 2U rack-mount design for professional installations

Description

The new DriveCore™ Install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology.

Key Features:

TRUE RACK DENSITY – Power points of 300W or 600Win 2-/4-/8-channel configurations – all in a 2 Rack Unit form factor. More channels in one box allow smaller infrastructure rooms that can reduce operational costs while giving you the utmost in installation flexibility.
DIRECT DRIVE CONSTANT VOLTAGE – Save money by using smaller gauge wiring to drive the speakers using either 70Vrms or 100Vrms. With no need for a step-up transformer at the output, the DCi produces higher audio quality much more efficiently.
CHANNEL INDEPENDENT HI-Z/LOW-Z SELECTION –Drive either one or two speakers in low-Z mode, or literally hundreds of speakers in high-Z mode (70Vrms or100Vrms). This means better design flexibility since DCi powers all loads on a channel-by-channel basis.
BRIDGEABLE CHANNEL PAIRS – Unlike amps from other manufacturers, the DCi Series channels are bridgeable – even in 100Vrms mode – which means even more adaptability for higher power applications such as subwoofers.
REMOTE ON/OFF INTERFACE – Save power by integrating the amplifier into a control system so you can easily turn it on and off.
EFFICIENT COOLING DESIGN – Highly efficient internal cooling fans provide airflow to the most heat-generating parts. Incorporating the fans into the amplifier brick design maximizes cooling while minimizing wasted energy and noise.
ADVANCED POWER FACTOR CORRECTION (PFC) UNIVERSAL POWER SUPPLY – The most advanced power supply in an installation amplifier delivers power more efficiently in almost any condition than anyone else, resulting in less power dissipated and less heat in your racks.

Brand & Model	Crown DCI2600
Frequency Response (at 1W, 20Hz to 20kHz)	+/- 0.25 dB
Signal to Noise Ratio ( A-Weighted)	> 108 dB
Total Harmonic Distortion (at full rated power, 20 Hz – 20 kHz)	0.35%
Intermodulation Distortion (60Hz and 7kHz at 4:1) from full rated output to -30dB	<0.3%
Damping Factor (20 Hz to 100 Hz)	>1000
Input Impedance (nominal balanced, unbalanced)	10 kOhms, 5 kOhms
Maximum Input Level before Compression	+20 dBu
Maximum Input Level before Clipping	+26 dBu
Load Impedance (Stereo/Dual Mode)	2 – 16 Ohms; 70Vrms and 100Vrms
Load Impedance Bridge Mono	4 – 16 Ohms; 140Vrms and 200Vrms
Cooling	Continuously variable speed forced air, front to back airflow
Maximum Fan Noise (re dBA SPL @ 1M)	45
Required AC Mains (+/- 10%)	100V-240V ~ 50/60 Hz
IEC Power Connector	15A
Dimensions	19″ x 3.5″ x 14.25″ (48.3cm x 8.9cm x 35.63cm)
Weight	18lbs (8.53kg)