Welcome to Dusonav. Fantastic Beautifully designed
Category: Power Amplifiers

Parasound New Classic 2250 v.2 - 2 Channel Power Amplifier (Black)

Key Features

  • High-power Class AB stereo amplifier designed for robust, high-fidelity sound reproduction

  • Delivers strong, clean output capable of driving a wide range of loudspeakers with authority

  • Toroidal power supply with generous current reserves for stable performance under dynamic loads

  • Balanced (XLR) and unbalanced (RCA) inputs for flexible connection to preamplifiers and AV processors

  • Bridgeable mono mode to combine channels for increased output in single-channel applications

  • Low distortion and wide dynamic range for detailed, natural audio across music and movies

  • Protection circuitry including thermal and over-current safeguards for reliable operation

  • Loop output for adding additional amplification or supporting multi-room setups

  • Compact chassis with black finish for seamless integration into audio systems

  • Ideal for two-channel music systems or front left/right amplification in home theatre setups

Description

NewClassic 2250 v.2 Two Channel Power Amplifier

  • THX Ultra2 certified
  • 275 watts x 2 into 8 Ω (all channels driven)
  • 400 watts x 2 into 4 Ω or 2 Ω (all channels driven)
  • 750 watts x 1 bridged into 8 Ω or 4 Ω
  • 45 amps peak current per channel
  • 2 Ohm stable operation with load selector switch
  • Two pairs of speaker outputs with front panel A/B buttons
  • Rear-mounted lockout switch disables front A/B buttons
  • High pass filter, switchable for 20Hz or 40Hz
  • Automatic on/off by DC trigger with looping output
  • Automatic on/off by audio signal with 2 sensitivity settings
  • Fully discrete circuitry with high current toroid transformer
  • Bridging switch for stereo or mono operation
  • Efficient, low-heat design
  • DC Servo and relay protection circuits
  • Rear-mounted left and right gain controls
  • Standby, channel status, and high temperature indicators
  • Gold-plated RCA input jacks
  • Heavy-duty 24k gold-plated 5-way speaker terminals
  • 115/230v selector on rear panel

 

Specifications

All Channels Driven
275 watts x 2, 8Ω
400 watts x 2, 4Ω
400 watts x 2, 2Ω (Load switch set to 2-3Ω)
IM Distortion
0.05 %
Transient IM Distortion
Not measurable
Audio Turn On
Quieter: 1 mV
Louder: 6 mV
Bridged Mono
750 watts x 1, 8Ω
750 watts x 1, 4Ω (Load switch set to 2-3Ω)
S/N Ratio
114 dB at rated output, IHF A-weighted
106 dB at rated output, unweighted
93 dB at 2.828 V output, IHF A-weighted
84 dB at 2.828 V output, unweighted
AC Power Requirement
110 – 120 V / 220 -240 V, 50 – 60 Hz
0.5 watts standby
35 watts Idle (no audio)
1000 watts full output
Current Capacity
45 amps peak per channel
Input Impedance
33 k Ω
Frequency Response
20 Hz – 50 kHz, +0/-3 dB, 1 watt
Dynamic Headroom – 1.6 dB
Input Sensitivity
1 V in for 28.28 V out, THX standard
Dimensions
17.25″ Wide
18.5″ Deep, with cables connected
6″ High with feet, 5.25″ panel only (3U)
(437 x 470 x 153mm, 133mm panel only)
Total Harmonic Distortion
0.20% at full rated output
0.015% at average listening levels
Inter-Channel Crosstalk
85 dB @1 kHz, 73 dB @10 kHz, 67 dB @ 20kHz
Damping Factor – Over 150 at 20Hz
12V Trigger Turn On – DC 9 – 12V, 15 mA
Net Weight
43 lbs (19.5 kg)
Rack Mount Accessory
May be Purchased Separately: RMK33

 

Customer Reviews

No reviews yet.